NOTE: 1. When the machine is turned on for the first time, it will enter the AC mode - strong gear by default.

2. The machine has the memory function, and will automatically enter the mode before the last shutdown when turning it on.

Power-on / off

Step 1: Press the "start" button to turn the machine on.

Step 2: Press the "start" button again to turn it off. Around 20 seconds later, the fan will be turned off.

AC mode

Step 1: Pull down to remove the front grille. And pull out the water tank, fill the water tank to the maximum water level.

Step 2: Align the water tank outlet with the notch at the bottom of the machine and insert the water tank.

Step 3: Press the "start" button to turn the machine on.

Step 4: Then press the "Cooling" button to adjust the fan speed. There are 4 fan speeds for your options: Low("LO") - High("HI") - SUPER("SP") - longlasting comfort

Dry mode

Step 1: Pull down to remove the front grille. And pull out the water tank, empty the excess water in the tank.

Step 2: Align the water tank outlet with the notch at the bottom of the machine and insert the water tank.

Step 3: Press the "start" button to turn the machine on.

Step 4: Then, press the "dry" button, the display panel will show the real-time humidity of the current environment. The fan speed is fixed at "LO" and could not be changed.

NOTE: The dry mode defaults to the gentle wind speed and does not support other wind speed adjustments.

Fan mode

Step 1: Press the "start" button to turn the machine on.

Step 2: Press the "Fan" button to enter it. The fan speed is "SP"(Speedly) by default. There are 3 fan speeds for your options: Low("LO") - High("HI") - Super("SP")

Horizontal and Vertical air swing

These 2 functions make the machine air outlet to swing within a 50° angle range.

Horizontal swing: In any mode, press the "swing left and right" button to start it.
Vertical swing: In any mode, press the "swing up and down" button to start it.

Timing / Light

Step 1: Short press the "Time/Light" button to activate the timer function in any mode.

    Each press will increase the time by 10 minutes. After setting the time, wait for 3 seconds and the time on UI will flash, indicating that the time setting is successful. If you want to cancel the timing, press the timing/light button and set the time to "00min" and waiting for 3s.
    NOTE: The time range is 10min - 90min.

Step 2: Long press the "Time/Light" button for 3 seconds to turn on or off the ambience light in any mode.

Child lock

Step 1: Press the "Horizontal air swing" and "Vertical air swing" buttons for about 3 seconds at the same time can lock the child lock. The child lock light is always on. Then, repeat the same procedure to switch off the child lock function.